Hampton Solubility & Stability Screen

Solubility & Stability Screen（溶解度和稳定性的屏幕）
应用：溶解性和稳定性屏幕的设计，以协助识别解决方案的条件，促进蛋白质的溶解性和稳定性，并尽量减少蛋白质沉淀。

Solubility & Stability Screen

Solubility & Stability Screen HR2-072
Applications

Features
Methodologies

Description

Solubility & Stability Screen is designed to assist in the identification of solution conditions which promote protein solubility and stability, and minimize protein precipitation. Solubility & Stability Screen is a solubility screen, a stability screen, and may also be used as an additive screen in the presence of a crystallization reagent.
The Hampton Research Solubility and Stability Screen can evaluate protein solubility, stability and crystallization in the presence of 94 different chemical additives sampling 17 different classes of reagents plus two controls.
Protein solubility and stability are universally required in a wide range of applications, including general biochemical studies, the preparation of proteins in pharmaceuticals, structural biology and crystallization.1-11The preparation of a concentrated, soluble and stable protein sample can often be a difficult task as proteins often aggregate, precipitate or denature.
Thermofluor (also known as Differential Scanning Fluorimetry, DSF and Protein Thermal Shift) provides a rapid, convenient and effective means of identifying subsaturating solution conditions that may also correlate with protein heterogeneity and poor crystallization outcomes.12
Protein solubility and stability is affected by many different chemical factors including pH, buffer type, chemical additives and excipients. pH and buffer type are dominant protein solubility and stability variables and can be evaluated and optimized using the Hampton Research Slice pH kit HR2-070. Slice pH evaluates protein solubility, stability and crystallization versus 20 different buffers over the pH range 3.5-9.6. Chemical additives influencing protein solubility and stability can be evaluated using the Solubility & Stability Screen.
It is widely accepted that protein solubility and stability can be increased by the use of chemical additives.5,15Seventeen classes of reagents are sampled by the Solubility & Stability Screen and each of these classes has been reported as important in improving sample solubility and stability.2-11
The Solubility & Stability Screen is a set of 94 high purity reagents formulated in high purity water (NCCLS/ASTM Type 1+) at 25°C and are 0.22 micron sterile filtered. The 94 solubility and stability reagents are formulated at 2 to 10 times their recommended working concentration. The remaining two reagents are water and a negative (TCA) control. A water control demonstrates the effect of diluting sample as well as sample buffer concentration. TCA, the negative control, demonstrates total sample precipitation, loss of sample solubility and loss of sample stability. The effects of the Solubility & Stability reagents can be compared with this negative control to assist in the identification of reagents promoting sample solubility and stability. 500 microliters of each reagent is supplied in a sterile 96 well polypropylene Deep Well block. The Solubility & Stability Screen reagents are compatible with the sitting or hanging drop vapor diffusion, microbatch, free interface diffusion, sandwich drop vapor diffusion, and dialysis crystallization methods utilizing water soluble reagents.

Hampton 水晶透明密封带Crystal Clear Sealing Tape

3 inch, 1.88 inch, 1.88 inch with dispenser, 0.75 inch with dispenser (left to right)

0.75 inch Crystal Clear Sealing Tape
Applications  应用
Sealing tape used to seal sitting drop crystallization experiments
Description
These optically clear tapes are compatible with protein crystallization reagents. The polypropylene Crystal Clear Sealing Tapes use acrylic solvent based adhesives which are compatible with aqueous crystallization reagents.
Catalog number HR3-511 is a 1.88 inch (48 mm) wide, 3 mil tape on a 43.7 yard (40 M) roll with a 1.5 inch core and is supplied with a green dispenser / cutter.Catalog number HR4-511 is a 1.88 inch wide, 3 mil tape on a 60 yard roll with a 3 inch core and no dispenser / cutter.Two strips of the HR3-511 or HR4-511 will seal a Corning, Cryschem, CrystalClear Strip, Greiner, Intelliplate, Linbro, Swissci (MRC), VDX and VDXm plate.Catalog number HR4-506 is a 3 inch wide, 3 mil tape on a 54.86 yard roll with a 3 inch core and no dispenser / cutter.One strip of the HR4-506 will seal a Corning, Cryschem M, CrystalClear Strip, Greiner, Intelliplate, Swissci (MRC) and VDXm plate.Crystal Clear Mini Sealing Tape HR4-508 is a 0.75 inch (19 mm) wide, 3 mil tape on a 650 inch (16.5 M) roll and is supplied with a clear dispenser / cutter. The tape is useful for resealing or patching wells after mounting crystals. The tape is also wide enough to seal a single row of a Cryschem S or Cryschem M plate.See chart for tape and plate compatibility.

Hampton AlumaSeal™ II Sealing Film and Applicator

 Description
A 38 µm soft non-permeable aluminum foil sealing film with strong medical-grade adhesive, AlumaSeal II sealing films eliminate the need for heat-sealing devices or mats during the resealing of reagents in polypropylene deep well blocks. Each sealing film measures 82.6 x 142.9 mm and offers sufficient sealing area for 96 deep well blocks. Length between the perforations with end tabs removed is 125.4 mm. Compared to other aluminum foils, AlumaSeal II has less tendency to roll back on itself when removing the backing paper and it conforms well to the plate during application.AlumaSeal II is a soft, pierceable adhesive film designed for the convenient and rapid sealing of polypropylene deep well blocks. A multiple split backing with two end tabs allows for easy, accurate positioning and secure sealing. The use of an adhesive sealing film minimizes evaporation and helps to prevent well-to-well cross contamination in reagent blocks. AlumaSeal II films are easily pierced by pipettte tips or robotic probes or piercing tools for direct reagent recovery without significant gumming by adhesive.

CAT NO	NAME	DESCRIPTION
HR8-069	AlumaSeal II Sealing Film	100 pack
HR4-413	Film Sealing Paddle	5 pack

Hampton PEG/Ion • PEG/Ion 2 • PEG/Ion HT

Applications
  Primary or secondary, polymer, salt and pH matrix crystallization screen for biological macromolecules

PEG/Ion, developed by Hampton Research, is a crystallization screen designed to evaluate monodisperse, high purity Polyethylene glycol 3,350 and 48 unique salts representing a very complete range of anions and cations frequently used in the crystallization of biological macromolecules. The primary screening variables are PEG, ion type, ionic strength, and pH. More than 60% of the published crystallizations utilized PEG as a primary crystallization reagent and in approximately 50% of those reports, the PEG was combined with an ion as a secondary crystallization reagent. PEG/Ion reagents are formulated without a buffer and are not pH titrated.
PEG/Ion 2 is an extension to the fundamental crystallization strategy in PEG/Ion. PEG/Ion 2 reagents cover the monodisperse, high purity Polyethylene glycol 3,350 and an array of neutralized and pH adjusted organic acids, multivalent ions, a novel Citrate BIS-TRIS propane buffer system and pH (4 – 8.8). The formulation of PEG/Ion 2 was developed at Hampton Research. Each of the 48 reagents in PEG/Ion 2 contains PEG 3,350 as the polymer (precipitant). The concentration of PEG is varied from 12% w/v to 20% w/v depending upon the type and concentration of buffer/salt paired with the polymer. Thirteen of the forty-eight PEG/Ion 2 reagents contain a separate buffer component. The remaining PEG/Ion 2 reagents are buffered by the titrated organic acid salt. Six of these thirteen conditions feature a novel Citric acid BIS-TRIS propane (CBTP) buffer. The CBTP buffer uses Citric acid and BIS-TRIS propane as the acid base pair to create a two component buffer system effective across pH 2.5 to 9.5. The ratio of Citric acid to BIS-TRIS propane determines the solution pH. Thirty-five of the forty-eight PEG/Ion 2 reagents contain a neutralized or pH adjusted organic acid in the presence of the polymer. Neutralized organic acids are highly effective crystallization salts.¹ Four PEG/Ion 2 reagents feature polyvalent cations. Two of these reagents contain cation mixes, saving sample by screening six different cations with only two reagents. Tryptone, a casein digest combinatorial library of peptides, is included in PEG/Ion 2. PEG/Ion 2 reagents 1-30, 42, 45-47 are formulated without a buffer and are not pH titrated.
PEG/Ion contains 48 unique reagents, 10 ml each.
PEG/Ion 2 contains 48 unique reagents, 10 ml each.
PEG/Ion HT contains 1 ml of each reagent from PEG/Ion and PEG/Ion 2 in a single Deep Well block format.
Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.

Crystals of Peptidoglycan Recognition Protein (PGRP) from camel milk grown using the Hampton Research PEG/Ion screen. Sharma, P., Singh, N., Sinha, M., Sharma, S., Perbandt, M., Betzel, C., Kaur, P., Srinivasan, A. & Singh, T.P. All India Institute of Medical Sciences, Department of Biophysics, New Delhi, India. CAT NO NAME DESCRIPTION HR2-126 PEG/Ion Screen 10 ml, tube format HR2-098 PEG/Ion 2 Screen 10 ml, tube format HR2-139 PEG/Ion HT 1 ml, Deep Well block format

Hampton Polyethylene glycol 4,000

Description
Polyethylene glycol 4,000
Synonym: PEG 4,000
H(OCH₂CH₂)_nOH
M_r 3,500-4,500
CAS Number [25322-68-3]
EC Number 500-038-2
Merck 14,7568
RTECS TQ3500000
MDL Number MFCD00081839
PubChem Substance ID 24890217
Melting point (Starting Material) 58.0-61.0°C
Aldehyde None detected
Peroxide None detected
HR2-529 Measured pH range: 6.9 – 9.5 at 25°C
HR2-529 Measured Conductivity Range: 35.3 – 46.9 µS/cm at 25°C
HR2-529 Measured Refractive Index Range: 1.40172 – 1.40279 at 20°C

Hampton 蛋白结晶优化试剂 Optimization Screens

1、Solubility & Stability Screen  蛋白特异性试剂优化溶解性和稳定性
Protein specific agents for optimization of solubility & stability  
2、Solubility & Stability Screen 2   离子缓冲液
Buffer, pH & ionic strength screen for optimization of solubility & stability
3、Slice pH    PH缓冲液
pH & buffer screen for optimization of crystals or sample solubility & stability
4、Additive Screen  96孔板添加剂试剂盒
96 compound screen for optimization of crystal size & quality
5、Silver Bullets • Silver Bullets Bio
Small molecule additive screen for optimization of crystal size & quality
6、Detergent Screen
Detergent screen for optimization of crystals or sample solubility & stability
7、Ionic Liquid Screen
Ionic liquid additive screen for optimization of crystal size & quality
8、StockOptions Buffer Kits
Titrated buffer sets for optimization of crystals or sample solubility & stability
9、StockOptions Polymer
n of crystal size & quality
10、StockOptions Salt
Salt reagent kit for optimization of crystal size & qualit
11、Polymer reagent kit for optimizatioy
Proti-Ace
In situ proteolysis kit protein for crystallization screening & optimization
12、Reductive Alkylation
Reductive alkylation kit for crystallization screening & optimization
13、Silica Hydrogel Kit
pH neutral silica hydrogel matrix crystallization
14、Low Melting Agarose
Agarose gel matrix crystallization
15、CryoPro
Water soluble cryoprotectant reagent set
16、Heavy Atom Screens
Heavy atom kits for multiple isomorphous replacement
17、I3C Phasing Kit
Produce heavy atom derivative of biological macromolecules for phasing

Hampton  MembFac • Crystal Screen Lite • MembFac HT

Features
  Membrane protein sparse matrix screens
  Sparse matrix formula efficiently samples salts, polymers, organics and pH
  pH range 4.6 – 8.5
  Formulated for use with detergents
   Tube or Deep Well block format
   Crystal Screen Lite features a lower ionic strength than the original Crystal Screen

Description
MembFac is a highly effective sparse matrix screen specifically designed as a preliminary screen for the crystallization of membrane proteins. MembFac is based upon the highly effective biased sparse matrix methodology. The MembFac screen matrix is optimized for the crystallization of membrane proteins.
MembFac contains 48 unique reagent formulations. With this set of 48 conditions, numerous chemicals and chemical combinations are utilized, allowing one to evaluate a large variety of potential crystallization conditions. MembFac covers a broad pH range between 4 and 9.
The Rationale
The basic rationale of MembFac is to perform a sparse matrix screen while changing the detergent dimension because detergents play an important factor in the crystallization of membrane proteins. A MembFac screen is to be completed for each detergent. Detergent screens are available separately.
The Method
The membrane protein of interest is first isolated in the detergent which gives the highest stability and activity. The protein concentration should be approximately 10 to 20 mg/ml and the detergent concentration should be only slightly above the CMC. The sample is then set against MembFac, using all 48 solutions plus the screening detergent(s) of choice. The screening detergent concentration should be approximately one to three times the CMC. Hence, for each detergent screened, one would utilize approximately 1 to 2 mg of sample.
The MembFac protocol was used to crystallize membrane proteins including SQR, fumerate: quinone oxireductase, LHII, and LHCII.
Crystal Screen Lite is a sparse matrix of trial crystallization reagent conditions based upon the Crystal Screen™.³ The primary screen variables are salt, pH, and precipitant (salts, polymers, volatile organics, and non-volatile organics).²Crystal Screen Lite differs from the original Crystal Screen kit in that the primary precipitant reagents are one-half the concentration of that used in the original Crystal Screen formulation. The secondary salts, ions, and buffers remain at the original Crystal Screen concentration. Reducing the primary concentration of the primary precipitant results in a screen which is “more gentle” on the sample and typically produces much less precipitate conditions than the original Crystal Screen.
MembFac contains 48 unique reagents, 10 ml each.
MembFac HT contains 1 ml each of all 48 reagents from MembFac and reagents 1-48 from Crystal Screen Lite in a single Deep Well block format.
Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.

Hampton 蛋白结晶试剂–Crystal Screen
Crystal Screen • Crystal Screen 2 • Crystal Screen HT

Applications
 Primary screen for proteins, soluble peptides, nucleic acids, & water soluble small molecules
 Sparse matrix additive screen

Features
 The original sparse matrix screen
 Sparse matrix formula efficiently samples salts, polymers, organics, & pH
 Proven effective with more than 1,000 biological macromolecules
 Tube or Deep Well block format

Description
The Crystal Screen and Crystal Screen 2 reagent kits are designed to provide a highly effective and rapid screening method for the crystallization of macromolecules. The screens are simple and practical for finding initial crystallization conditions. The initial crystallization conditions for more than 1,000 proteins, peptides, oligonucleotides, and small molecules have been determined using Crystal Screen.
A highly effective approach to overcome the exhaustive search for suitable crystallization conditions is the use of a sparse matrix method of trial conditions that is biased and selected from known crystallization conditions for macromolecules. The formulation utilized in Crystal Screen and Crystal Screen 2 evaluates 96 unique mixtures of pH, salts, polymers and organics, and their ability to promote crystal growth.
Crystal Screen contains 50 unique reagents, 10 ml each and is based on the sparse matrix formulation first described by Jancarik and Kim in 1991.
Crystal Screen 2, an extension of Crystal Screen, contains 48 unique reagents, 10 ml each and is based on the formulation first described by Cudney et al in 1994.
Crystal Screen HT contains 1 ml each of reagents 1-48 from Crystal Screen and all 48 reagents from Crystal Screen 2 in a single Deep Well block format.
Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.


Crystals of a carbohydrate processing enzyme grown using Hampton Research Crystal Screen. Shirley Roberts, York Structural Biology Laboratory, York, United Kingdom.

Crystal of zRFP574 red fluorescent protein grown using Hampton Research Crystal Screen 2. Pletneva et al. Acta Cryst. D62, 527-532 (2006). Nadya, Russian Academy of Science, Moscow, Russia.

Hampton结晶用缓冲盐试剂盒– SaltRx
SaltRx 1 • SaltRx 2 • SaltRx HT

Hampton蛋白结晶产品目录

Hampton GRAS 5 • GRAS 6 Screens
Applications
 GRAS reagent crystallization screen for proteins, including monoclonal antibodies, where Polyethylene glycol is the primary reagent, sampling pH 4.5 to 10
. Identify GRAS based reagents that promote crystallization of biotherapeutics for bioprocess, bioformulation, and continuous flow manufacturing applications
Features

Description

GRAS Screen™ 5 and 6 were developed by Hampton Research for the crystallization of proteins, including monoclonal antibodies. Each of the chemicals in GRAS Screen 5 and 6 has been used under one or more of the following categories. As (1) a Generally Recognized As Safe (GRAS) substance, (2) a pharmaceutical excipient, (3) a normal physiological constituent, (4) a metabolic byproduct, and/or (5) a Everything Added to Food in the United States (EAFUS) substance.
GRAS Screen 5 samples four low molecular weight Polyethylene glycols (300, 400, MME 550, and 600) at three concentrations versus eight unique buffers encompassing pH 4.5 to 10. GRAS Screen 5 is supplied in a 96 Deep Well block format and is compatible with robotic and multi-channel pipet liquid handling systems. GRAS Screen 5 is compatible with vapor diffusion, free interface diffusion, and microbatch crystallization methods. For research use only.
GRAS Screen 6 samples four medium molecular weight Polyethylene glycols (1,000, MME 2,000, 3,350, & 4,000) at three concentrations versus eight unique buffers encompassing pH 4.5 to 10. GRAS Screen 6 is supplied in a 96 Deep Well block format and is compatible with robotic and multi-channel pipet liquid handling systems. GRAS Screen 6 is compatible with vapor diffusion, free interface diffusion, and microbatch crystallization methods. For research use only.

Hampton 24孔坐滴板 Cryschem Plate
Applications
 Sitting drop crystallization
  Heavy atom soaks
  Seeding

Materials
  Optically clear polystyrene

The Cryschem Plate is a 24 well sitting drop plate that is sealed with clear sealing tape. The polystyrene plate is supplied with a raised cover so the plate can also be sealed with vacuum grease and plain glass or plastic cover slides (22 mm diameter). The stackable, 24 well plates have distortion-free, flat bottom wells and a concave sitting drop post in the center of the well for concentric equilibration of the drop with the reagent. Each plate is individually sealed. The top of the plate and each of the 24 wells is a single, flat plane for smooth and easy seal application. Well spacing provides for a large seal area between wells to prevent cross contamination and evaporation.
上海金畔生物作为Hampton蛋白结晶产品的代理商，竭诚为您服务，欢迎新老客户咨询。
Cryschem Plate is large plate footprint with circular reagent reservoir. Cryschem plate approximate size: 15.1 cm x 10.6 cm x 2.2 cm. Approximate well size: 1.6 cm x 1.5 cm. Typical fill volume: 500 to 1,000 µl. Well capacity: 1.5 ml. Maximum drop volume on post: 40 µl. Recommended seal: HR3-511 Crystal Clear Sealing Tape (1.88 inch x 43.7 yard roll, with cutter) or HR4-511 Crystal Clear Sealing Tape (1.88 inch x 60 yard roll, without cutter).
Cryschem M Plate is microplate footprint with circular reagent reservoir. Cryschem M microplate approximate size: 128 mm x 86 mm x 14 mm. Approximate circular reservoir size: 15 mm wide x 9 mm deep. Typical reservoir volume: 500 µl. Well capacity: 1.1 ml. Maximum drop volume on post: 30 µl. Recommended seal: HR3-609 Crystal Clear Sealing Film (100 pack), HR4-521 ClearSeal Film (100 pack) or HR4-506 Crystal Clear Sealing Tape (3 inch x 55 yard roll, without cutter). HR4-508 Crystal Clear Sealing Tape (0.75 inch x 650 inch, with cutter) seals a single row at a time.
Cryschem S Plate is microplate footprint with square reagent reservoir. Cryschem S microplate approximate size: 128 mm x 86 mm x 14 mm. Approximate square reservoir size: 15 mm wide x 9 mm deep. Typical reservoir volume: 500 µl. Well capacity: 1.1 ml. Maximum drop volume on post: 30 µl. Recommended seal: HR3-609 Crystal Clear Sealing Film (100 pack), HR4-521 ClearSeal Film (100 pack) or HR4-506 Crystal Clear Sealing Tape (3 inch x 55 yard roll, without cutter). HR4-508 Crystal Clear Sealing Tape (0.75 inch x 650 inch, with cutter) seals a single row at a time.

Cryschem plate

Sigma代理  Abcam代理  CST代理  Santa Cruz代理  Biolegend代理 ebioscience代理  Invitrogen代理   millipore代理  BD流式抗体代理   GeneTe x抗体代理  Novus抗体代理   R&D代理 Biovison代理  Jackson代理  MBL抗体代理  ProSpec抗体代理  Bethyl抗体代理  Antibody Revolution抗体代理  Torrey Pines Biolabs代理  Amresco代理  MPbio代理  Laysan bio代理  NANOCS代理  Avanti代理  wako代理  lumiprobe代理（活性荧光染料）   NEB酶代理  Roche酶代理  Toyobo酶代理   USP代理  EP代理  Dr代理  TRC代理  TCI代理  Reagecon代理 Megazyme代理 Hampton代理（蛋白结晶） whatman代理（滤膜滤纸） GE代理（蛋白纯化） Corning康宁代理  Axygen代理 Falcon代理  NISSUI日水代理 Himedia代理 OXOID代理  BD培养基代理 Ludger代理（糖蛋白分析产品）  Eppendorf代理  Labnet代理  标准品代理 抗体代理 酶试剂代理  培养基代理 耗材代理 Elisa试剂盒代理 。

VDX Plate with sealant

Applications

		Hanging drop crystallization
		Sitting drop crystallization with Micro-Bridges® or Glass Sitting Drop Rods™
		Dialysis crystallization with Dialysis Buttons™

Features

		24 well plate with raised cover
		Sealant applied to 24 wells, ready to seal with cover slides
		Compatible with 22 mm diameter square and circle cover slides
		Optically clear plastic
		Extremely versatile and cost-effective crystallization platform
		Compatible with UV crystal imaging when used with HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides and HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

Description
24 well crystallization plate for hanging drop or sitting drop vapor diffusion crystallization (when used with Micro-Bridges or Glass Rods), or dialysis crystallization (when used with Dialysis Buttons). Stackable, optically clear plastic 24 well plates with raised covers (to allow room for cover slides) and flat bottoms for exceptional optics. Raised, wide rings around each reservoir (well) minimize cross contamination and allow each well to be individually sealed with 22 mm diameter circle or square cover slides. Plates are individually wrapped and supplied with applied sealant. 15.0 cm x 10.8 cm plate footprint is convenient for manual pipetting and well access while at the same time compatible with some automated liquid handling systems. Approximate dimensions: 15.0 cm x 10.6 cm x 2.2 cm. Approximate well size: 1.7 cm x 1.6 cm. Typical well volume: 500 to 1,000 µl. Well capacity: 3.5 ml.

Hampton PEGRx
PEGRx 1 • PEGRx 2 • PEGRx HT

Applications   主要是调节样本的PH值
  Primary and secondary, polymer and pH based crystallization screen for biological macromolecules

PEGRx 2 is a crystallization reagent kit designed to evaluate an array of polymers of varying molecular weight in a medium ionic strength environment in the presence of additives, salts, volatile organics and polyols versus a wide range of pH. Polymer reagents include Polyethylene glycols and Polyethylene glycol monomethyl ethers. The polymer molecular weight range between 200 and 20,000 is evaluated in a medium ionic strength formulation. Ten different buffers are used to span the range of pH between 3.5 and 9. The primary screen variables are polymer type, polymer molecular weight, pH and secondary reagents which include additives, salts, volatile organics and polyols.上海金畔生物作为Hampton蛋白结晶产品的代理商，竭诚为您服务，欢迎新老客户咨询。PEGRx 1 contains 48 unique reagents, 10 ml each.
PEGRx 2 contains 48 unique reagents, 10 ml each
PEGRx HT contains the 96 PEGRx 1 and PEGRx 2 reagent in a single Deep Well block format.
Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.

PEGRx

DesR crystals grown using Hampton Research PEGRx, Jin Ho Moon, Korea University.

Hampton蛋白质结晶捞针（结晶环）18 mm Mounted CryoLoop™

Applications

Cryocrystallography

Features

		Adjustable loop orientation
		Synthetic CryoLoop on adjustable stainless steel MicroTube
		MicroTube specially engineered with EasySnap notches
		20 micron diameter nylon CryoLoop

Description
Similar to the Mounted CryoLoop™ in design and function, the Adjustable Mounted CryoLoop allows one to manipulate and orient the CryoLoop to multiple, unique positions previously unattainable with typical cryo setups. The Adjustable Mounted CryoLoop is a 20 micron diameter synthetic loop mounted inside a malleable stainless steel sleeve, which in turn, is mounted inside the EasySnap MicroTube™.
Using a specially designed L-shaped tool (HR5-902) with a positioning notch, one can manipulate the angle and orientation of the CryoLoop by bending and adjusting the angle of the malleable stainless steel insert which holds the CryoLoop. The Adjustable Mounted CryoLoop may be positioned several times. Note: Repeated manipulation will fatigue the sleeve which can lead to failure of the sleeve. The Adjustable Mounted CryoLoop is designed to work with the CrystalCap System components.
The MicroTube is 24 mm in length and is specially engineered with EasySnap™ notches at the 10, 12, 14, 18, and 21 mm measures. To obtain the desired length of MicroTube, simply snap the MicroTube at the desired length and stake it to the CrystalCap™ Magnetic or CrystalCap™ Copper Magnetic. These nylon loops show minimal diffraction, are thin for fast freezing, strong, and aerodynamic.
Most data collection geometries prefer or require a 22 mm length between the base of the cap and the beam. For a 22 mm overall length using the CrystalCap, CrystalCap ALS, CrystalCap ALS HT and CrystalCap SPINE HT, snap the MicroTube at the second notch from the bottom, creating an 18 mm MicrozTube lenghth and secure to the CrystalCap using epoxy or similar adhesive. For a 22 mm over length using the CrystalCap Copper, CrystalCap Copper HT, CrystalCap ALS Copper HT snap the MicroTube at the fifth notch from the bottom (notch closest to the CryoLoop) and secure to the CrystalCap using epoxy or similar adhesive.
The HR5-902 Tool for Adjustable Mounted CryoLoop is not included with the Adjustable Mounted CryoLoop and must be purchased as a separated item.

18 mm Mounted CryoLoop

18 mm Mounted CryoLoop properly installed in a CrystalCap Magnetic

Crystal in CryoLoop

Hampton 蛋白质结晶试剂和耗材介绍

美国Hampton Research公司位于加利福尼亚州，是一家专门从事蛋白质晶体研究的生产商。该公司向全球科研人员提供全面的晶体研究试剂和相关实验耗材，同时提供晶体设计和合成方面的定制服务。Hampton Research公司以其先进的生物大分子结晶技术和广泛实用的产品线，不仅为全世界晶体研究人员的工作带来了便捷，而且也受益于科研人员的回馈不断发展自己，目前已成为晶体研究领域最受信赖的品牌之一。
上海金畔生物作为Hampton research品牌蛋白结晶产品的代理商，我们将竭诚为您服务，欢迎新老客户咨询。

Hampton research主要产品：

美国Hampton Research公司是世界上著名的蛋白质晶体试剂供应商，该公司的产品目录是由上海金畔生物科技有限公司提供，该目录分为12个大类和几十个小类。

Hampton蛋白质结晶试剂及耗材分类

第一类：Crystallization Screens   用于筛选和优化蛋白质/多肽/核酸结晶的一系列经验证的高精配方型溶液

1.PCT Pre-Crystallization Test（PCT预结晶试验）
应用：结晶筛选，确定相应的样品浓度，PCT试验用来预结晶结晶筛选，以确定适当的蛋白质浓度

2. Slice pH（PH切片）

应用：溶解度和结晶筛选

3. Solubility & Stability Screen（溶解度和稳定性的屏幕）

应用：溶解性和稳定性屏幕的设计，以协助识别解决方案的条件，促进蛋白质的溶解性和稳定性，并尽量减少蛋白质沉淀。

4. Index

应用：不同的试剂系统的结晶屏幕的蛋白质复合物，多肽，核酸，水溶性小分子。

5. Crystal Screen（晶体屏幕）

应用：
主屏幕的可溶性肽，蛋白质，核酸，和水溶性小分子。稀疏矩阵的加法屏幕
5.PEG/Ion Screen & PEG/Ion HT Screen 用于可溶性蛋白的结晶
6.PEG/Ion 2 Screen?用于可溶性生物大分子结晶
7.Crystal Screen? & Crystal Screen? HT 用于蛋白质，复合物，缩氨酸，核酸以及水溶性小分子的传统的经典结晶试剂
8.Crystal Screen 2?用于蛋白质，缩氨酸，核酸以及水溶性小分子的结晶
9.Crystal Screen Lite?用于蛋白质，缩氨酸和核酸的结晶试剂
10.Crystal Screen Cryo?用于蛋白质，缩氨酸，核酸的结晶
11.Grid ScreenTM用于蛋白质的结晶，分为七小类。
12.Quik Screen?用于可溶性蛋白的结晶
13.Quik Optimize?快速优化试剂，与Quik Screen? 或 custom screen配套使用
14.Low Ionic Strength Screen?用于完整的单克隆抗体，单克隆抗体片段以及低离子浓度很少溶解的蛋白的结晶
15.Nucleic Acid Mini Screen?用于核酸片段的结晶化
16.Natrix?用于核酸，蛋白核酸聚合物的结晶
17.MembFac?& MembFac? HT用于膜蛋白的结晶
18.Additive Screen?增强或改变样品可溶性的试剂
19.Detergent Screen?去垢剂
20.Heavy Atom Screens重原子结晶试剂
21.Izit Crystal Dye?蛋白染色试剂，用于区分蛋白晶体和盐晶体

第二类：Custom Shop Crystallization Reagents  结晶试剂盒中单独的试剂

1. Solubility & Stability Individual Reagents
2. Slice pH Individual Reagents
3. Ionic Liquid Screen Individual Reagents
4. Proti-Ace & Proti-Ace 2 Individual Reagents
5. PCT Individual Reagents
6. Silver Bullets & Silver Bullets HT Individual Reagents
7. Silver Bullets Bio & Silver Bullets Bio HT Individual Reagents
8. Index • Index HT Individual Reagents
9. PEGRx 1 Individual Reagents
10. PEGRx 2 Individual Reagents
11. SaltRx Individual Reagents
12. PEG/Ion Individual Reagents
13. Crystal Screen Lite Individual Reagents
14. Crystal Screen Cryo Individual Reagents
15. Crystal Screen 2 Cryo Individual Reagents
16. Grid Screen Ammonium Sulfate Individual Reagents
17. Grid Screen PEG 6000 Individual Reagent
18. Grid Screen Sodium Chloride Individual Reagents
19. Grid Screen PEG/LiCl Individual Reagents
20. Quik Screen Individual Reagents
21. Natrix Individual Reagents

第三类：Optimize Reagents 优化试剂

1.Optimize-Polymers聚合体
2.Optimize-Organics (Volatile) 挥发性有机物
3.Optimize-Organics (Non-Volatile)非挥发性的有机物
4.Optimize-Salts 盐类
5.Optimize-Buffers缓冲液
6.Optimize-Solubilizing Agents (NDSB) 溶解试剂NDSB
7.Optimize-Reducing Agent还原剂-TCEP氢氯化物
8.Optimize-Cryoprotectants
9.Optimize-Oils用于结晶的油类
10.Optimize-Silica Hydrogel硅胶
11.Optimize-LM Agarose低熔点琼脂糖

第四类：StockOptions Kits

1. StockOptions Salt
2. StockOptions pH
3. StockOptions Buffer
4. CryoPro

第五类：Crystallization Plates, Hardware & Accessories 结晶耗材

1.24 Well Crystallization Plates 24孔晶体板-分悬滴和坐滴两种
2.48 Well Crystallization Plates 48孔晶体板
3.72 Well Crystallization Plates72孔晶体板
4.96 Well Crystallization Plates 96孔晶体板
5.384 Well Crystallization Plates 384孔晶体板-用于坐滴的结晶
6.Cover Slides & Related Tools
7.Glass Sitting Drop Rods用于坐滴的结晶
8.Micro-Bridges?微桥-坐滴结晶的支撑物
9.Glass Plates – 3 and 9 Well3孔和9孔玻璃板
10.Sealants, Sealing Grease, Oils, Applicator密封油脂，油及其它器具
11.Sealing Films, Tapes, Mats & Covers
12.Microdialysis Buttons, Rods & Membranes微量渗析结晶化
13.Granada Crystallization Box

第六类：Tools, Seeding & Resin（结晶工具、树脂）

1. Tungsten-carbide Glass Cutter
2. X-Acto Gripster Knife
3. Micro-Tools™ Set
4. Micro-Tools II™ Set
5. Forceps
6. Crystal Probe™
7. Crystal Pencil
8. Seed Bead
9. Seeding Tool

第七类：Cryocrystallography

1. CrystalCap HT™ Systems
2. CrystalCap Magnetic™ Systems
3. CrystalCap™ Systems
4. CryoLoops & MicroTubes
5. Cryo Tools
6. Canes, Sleeves, Coders & Boxes
7. Dewars

第八类：Capillary Mounts & Supplies（毛细管座椅支架供应）
第九类：Goniometer Heads & Supplies（测角头及用品）
第十类：Xenon Derivatization（氙气衍生物）
第十一类：Labels & Pens（标签和记录笔）
第十二类：Protein Crystallization Standards（蛋白质结晶的标准）
Hampton代理，Hampton上海代理，Hampton北京代理，Hampton广州代理，Hampton总代理，Hampton一级代理，Hampton特约代理，Hampton现货上海金畔生物科技有限公司Hampton专业代理。
Sigma代理  Abcam代理  CST代理  Santa Cruz代理  Biolegend代理 ebioscience代理  Invitrogen代理   millipore代理  BD流式抗体代理   GeneTe x抗体代理  Novus抗体代理   R&D代理 Biovison代理  Jackson代理  MBL抗体代理  ProSpec抗体代理  Bethyl抗体代理  Antibody Revolution抗体代理  Torrey Pines Biolabs代理  Amresco代理  MPbio代理  Laysan bio代理  NANOCS代理  Avanti代理  wako代理  lumiprobe代理（活性荧光染料）   NEB酶代理  Roche酶代理  Toyobo酶代理   USP代理  EP代理  Dr代理  TRC代理  TCI代理  Reagecon代理 Megazyme代理 Hampton代理（蛋白结晶） whatman代理（滤膜滤纸） GE代理（蛋白纯化） Corning康宁代理  Axygen代理 Falcon代理  NISSUI日水代理 Himedia代理 OXOID代理  BD培养基代理 Ludger代理（糖蛋白分析产品）  Eppendorf代理  Labnet代理  标准品代理 抗体代理 酶试剂代理  培养基代理 耗材代理 Elisa试剂盒代理 。

Hampton GRAS 3 • GRAS 4 Screens
Applications
a.GRAS reagent crystallization screen for proteins, including monoclonal antibodies, where Salt is the primary, and Polyethylene glycol the secondary reagent, sampling pH 4-9
b.Identify GRAS based reagents that promote crystallization of biotherapeutics for bioprocess, bioformulation, and continuous flow manufacturing applications
Features

 Description
GRAS Screen™ 3 and GRAS Screen™ 4 were developed by Hampton Research for the crystallization of proteins, including monoclonal antibodies. Each of the chemicals in GRAS Screen 3 and 4 have been used under one or more of the following categories. As (1) a Generally Recognized As Safe (GRAS) substance, (2) a pharmaceutical excipient, (3) a normal physiological constituent, (4) a metabolic byproduct, and/or (5) a Everything Added to Food in the United States (EAFUS) substance.

GRAS Screen 3 samples twenty four salts, encompassing pH 4-9 versus four low molecular weight Polyethylene glycols (300, 400, MME 550, & 600). GRAS Screen 3 is supplied in a 96 Deep Well block format and is compatible with robotic and multi-channel pipet liquid handling systems. GRAS Screen 3 is compatible with vapor diffusion, free interface diffusion, and microbatch crystallization methods. For research use only.
GRAS Screen 4 samples twenty four salts, encompassing pH 4-9 versus four medium molecular weight Polyethylene glycols (1,000, MME 2,000, 3,350 & 4,000). GRAS Screen 4 is supplied in a 96 Deep Well block format and is compatible with robotic and multi-channel pipet liquid handling systems. GRAS Screen 4 is compatible with vapor diffusion, free interface diffusion, and microbatch crystallization methods. For research use only.
 

Hampton GRAS 1 • GRAS 2 Screens

stallization screen for proteins, including monoclonal antibodies, where Polyethylene glycol is the primary, and Salt the secondary reagent, sampling pH 4-9 Identify GRAS based reagents that promote crystallization of biotherapeutics for bioprocess, bioformulation, and continuous flow manufacturing applications Features Developed at Hampton Research Generally Recognized As Safe reagent formulation Samples pH 4.0 – 9.0 without an added buffer Primary crystallization reagent: GRAS Screen 1: PEG 300, 400, MME 550, & 600 GRAS Screen 2: PEG 1,000, MME 2,000, 3,350 & 4,000 Secondary crystallization reagent: 24 unique salts Compatible with Vapor diffusion, microbatch, free interface diffusion Reagents soluble between 4°C and 30°C Description GRAS Screen™ 1 and GRAS Screen™ 2 were developed by Hampton Research for the crystallization of proteins, including monoclonal antibodies. Each of the chemicals in GRAS Screen 1 and 2 have been used under one or more of the following categories. As (1) a Generally Recognized As Safe (GRAS) substance, (2) a pharmaceutical excipient, (3) a normal physiological constituent, (4) a metabolic byproduct, and/or (5) a Everything Added to Food in the United States (EAFUS) substance. GRAS Screen 1 samples four low molecular weight Polyethylene glycols (300, 400, MME 550, and 600) versus twenty-four salts, encompassing pH 4-9. GRAS Screen 1 is supplied in a 96 Deep Well block format and is compatible with robotic and multi-channel pipet liquid handling systems. GRAS Screen 1 is compatible with vapor diffusion, free interface diffusion, and microbatch crystallization methods. For research use only. GRAS Screen 2 samples four medium molecular weight Polyethylene glycols (1,000, MME 2,000, 3,350, & 4,000) versus twenty-four salts, encompassing pH 4-9. GRAS Screen 2 is supplied in a 96 Deep Well block format and is compatible with robotic and multi-channel pipet liquid handling systems. GRAS Screen 2 is compatible with vapor diffusion, free interface diffusion, and microbatch crystallization methods. For research use only.

ITEMS CAT NO NAME DESCRIPTION HR2-451 GRAS Screen 1 1 ml, Deep Well block format Price Quantity $245.00 CAT NO NAME DESCRIPTION HR2-452 GRAS Screen 2 1 ml, Deep Well block format Price Quantity $245.00

Hampton Optimize Reagents
1、Optimize – Polymers
Crystallization grade polymers for formulating screens or optimization
2、Optimize – Organics (Volatile)
Crystallization grade organics (volatile) for formulating screens or optimization
3、Optimize – Organics (Non-Volatile)
Crystallization grade organics (non-volatile) for formulating screens or optimization
4、Optimize – Salts
Crystallization grade salts for formulating screens or optimization
5、Optimize – Buffers
Crystallization grade buffers for formulating screens or optimization
6、Optimize – Solubilizing Agents (NDSB)
Crystallization grade non detergent sulfobetaines
7、Optimize – Reducing Agent
TCEP Hydrochloride
8、Optimize – Monoolein
LCP – Lipidic Cubic Phase
9、Optimize – Cryoprotectants
For cryoprotection of crystals
10、Optimize – Oils for Crystallization
Microbatch crystallization & oil layering
11、Optimize – Izit Crystal Dye
Izit™ color dye to differentiate protein crystals from salt crystals

Hampton 0.1毫米50号玻璃毛细管

货号：HR6-104
包装：25 pack

• 英文名：0.1 mm Glass Number 50 Capillary
• 品牌：Hampton

Hampton代理–金畔生物

硼硅玻璃50号毛细管壁厚0.01毫米，全长80毫米+ / – 5毫米。提供外径从0.1毫米到2毫米的毛细管，用于X射线数据收集，晶体密度测量和晶体生长实验。毛细管可以用蜡，环氧树脂等密封材料封闭，防止水分和气体。

应用
X射线数据采集
液-液扩散结晶
凝胶针状结晶
特征
50号硼硅玻璃
壁厚 10微米
描述
硼硅玻璃50号毛细管一端呈漏斗形，另一端封闭，壁厚0.01毫米，全长80毫米+/-5毫米，外径从0.1毫米到2毫米。可嵌入，盛放，储存小分子和生物大分子晶体用于X射线数据收集，晶体密度测量和晶体生长实验。毛细管可以用蜡，环氧树脂和其它密封材料密封，防止水分和气体。
请参照“线性吸收系数µcm-1表“，以决定适合的玻璃/石英玻璃毛细管。本表展示的是X射线数据收集时的辐射吸收量。
0.1mm至2.0mm毛细管开口端的基础尺寸为：3.0+/-0.15mm外径 x 0.13+/-0.10 mm壁厚，直径为在毛细管封闭端40毫米处的测量值。
 

货号	产品说明	公差
HR6-104	Size: 0.1 mm – 25 pack	0.1 mm -0.075 / +0.075 mm
HR6-106	Size: 0.2 mm – 25 pack	0.2 mm -0.050 / +0.050 mm
HR6-108	Size: 0.3 mm – 25 pack	0.3 mm -0.050 / +0.100 mm
HR6-110	Size: 0.4 mm – 25 pack	0.4 mm -0.100 / +0.100 mm
HR6-112	Size: 0.5 mm – 25 pack	0.5 mm -0.100 / +0.100 mm
HR6-114	Size: 0.6 mm – 25 pack	0.6 mm -0.100 / +0.100 mm
HR6-116	Size: 0.7 mm – 25 pack	0.7 mm -0.150 / +0.150 mm
HR6-118	Size: 0.8 mm – 25 pack	0.8 mm -0.150 / +0.150 mm
HR6-120	Size: 0.9 mm – 25 pack	0.9 mm -0.150 / +0.150 mm
HR6-122	Size: 1.0 mm – 25 pack	1.0 mm -0.150 / +0.250 mm
HR6-124	Size: 1.5 mm – 25 pack	1.5 mm -0.250 / +0.250 mm
HR6-126	Size: 2.0 mm – 25 pack	2.0 mm -0.250 / +0.250 mm

Hampton 96孔坐滴蛋白结晶板–Intelli-Plate
在生命科学领域，上海金畔生物为业界提供了丰富的实验室和生物医药生产研发的产品。庆祝上海金畔生物正式成为Hampton Intelli-Plate 96孔蛋白结晶板的签约代理商，在这里要感谢广大客户多年来对上海金畔生物科技有限公司的支持和厚爱，我们将一如既往的为广大客户带来Hampton Intelli-Plate 96孔蛋白结晶板高品质的产品和服务，欢迎广大新老客户来电咨询。
Intelli-Plate 96 (Art Robbins Instruments)
Applications
  Sitting Drop Crystallization   用于蛋白坐滴结晶
Features  特征：

Description
Art Robbins Instruments has developed the ideal family of plates for crystallography applications: the Intelli-Plate. All versions of the Intelli-Plate have the SBS microplate footprint and standard well spacing and are ideal for manual or automated processing.
The Intelli-Plate 96-2 Low Profile (Art Robbins 102-0001-10 Hampton Research HR3-116 and HR3-117) is a low profile version of the Intelli-Plate 96-2 LVR (Low Volume Reservoir). Reservoir volume: 100 µl max. Drop well volume: 4 µl and 10 µl max. UV transmissible and low birefringence.
The CrystalMation Intelli-Plate 96-3 low-profile crystallization plate (Art Robbins 102-0001-13 Hampton Research HR3-118 and HR3-119) is a low profile version of the Intelli-Plate 96-3 LVR (Low Volume Reservoir). The plate is designed for sitting drop vapor diffusion crystallization experiments. It is constructed from optically clear, UV-transmissible, chemically resistant plastic with superior low birefringence. The low-profile construction allows for higher density in plate storage and imaging systems, maximizing your investment and valuable space. The plate is designed to be a substantial improvement in existing low-profile plates, allowing for superior sealing due to thicker well design and a flat sealing surface. It has been built to the SBS (Society for Biomolecular Screening) standard dimensions with 8 vertical wells along the left side of the plate (A-H) and 12 horizontal wells along the top of the plate (1-12). It is compatible with automated instrumentation including the CrystalMation line of instruments from Rigaku. The plate features three identical sized sample drop wells per reservoir. The wells are concave depressions along the left side (Y-axis) of the plate and are located on the ledge above the adjacent, flat bottom reagent reservoir. Each well features a round bottom for easy crystal harvesting and can hold up to 1 µl of sample. The multiple well design allows for combinatorial experiments, complex co-crystallization experiments for ligand screening, or for drop concentration variation. The reagent reservoir is typically filled with 50 to 70 µl of reagent. Reservoir volume: 100 µl max. Drop well volume: 1 µl max. UV transmissible and low birefringence.
The Intelli-Plate 96-2 LVR (Art Robbins 102-0001-00 Hampton Research HR3-143 and HR3-145) is a Low Volume Reservoir version of the original Intelli-Plate. Reservoir volume: 100 µl max. Drop well volume: 1 µl max. UV transmissible and low birefringence.
The Intelli-Plate 96-3 LVR (Art Robbins 102-0001-03 Hampton Research HR3-183 and HR3-185) is a Low Volume Reservoir, 3 drop well version of the Intelli-Plate. Reservoir volume: 100 µl max. Typical reservoir volume 50 µl. Drop well volume: 1 µl max. UV transmissible and low birefringence.
The Intelli-Plate 96-2 Original crystallization plate (Art Robbins 102-0011-00 Hampton Research HR3-297 and HR3-299) is an optically clear plate for sitting drop vapor diffusion crystallization. All wells have standard 9 mm spacing to conform to SBS standards with 8 vertical wells along the left side of the plate (A-H) and 12 horizontal wells along the top of the plate (1-12). This plate features two locations for sample per reservoir. The sample drop locations are located along the left side of the reagent reservoir, along the Y-axis of the plate. The sample wells are concave depressions on the ledge above the adjacent, flat bottom reagent reservoir. One sample well is located above the second sample well. The top sample well can hold 10 µl or less of sample. The lower sample well can hold 4 µl or less of sample. The reagent reservoir is typically filled with 100 µl of reagent and is capable of holding up to 300 µl of reagent. The sidewalls separating adjacent wells or reservoirs are 0.9 and 1.0 mm thick in order to offer a larger area for sealing the plate and a separation of the reservoirs. This plate is rigid, with virtually no torsional flex and is designed for either manual or automated pipetting. UV transmissible and low birefringence.
The Intelli-Plate Flat Shelf (Art Robbins 102-0001-01 Hampton Research HR8-171 and HR8-172) crystallization plate is a flat drop shelf version of the original Intelli-Plate. Reservoir volume: 300 µl max. No drop well. UV transmissible and low birefringence.
The Intelli-Plate 96-2 Shallow Well (Art Robbins 102-0001-20 Hampton Research HR3-163 and HR3-164) has two identically sized 2 µL reaction wells and a 140 µL screen reservoir. Each of the two identical well features a round bottom shallow well design for easy crystal harvesting and is arranged in an 8 x 12 array. This plate has low birefringence and is UV compatible. This plate is also available in a low profile height (Art Robbins 102-0001-21).
The plates can be sealed using Crystal Clear Sealing Film (HR3-609), 3 inch wide Crystal Clear Sealing Tape (HR4-506) or ClearSeal Film™ (HR4-521).
The height of Intelli-Plate is 0.560 inches. The height of Intelli-Plate Low Profile is 0.315 inches (8.001 mm).

Intelli-Plate 96-3

Sigma代理  Abcam代理  CST代理  Santa Cruz代理  Biolegend代理 ebioscience代理  Invitrogen代理   millipore代理  BD流式抗体代理   GeneTe x抗体代理  Novus抗体代理   R&D代理 Biovison代理  Jackson代理  MBL抗体代理  ProSpec抗体代理  Bethyl抗体代理  Antibody Revolution抗体代理  Torrey Pines Biolabs代理  Amresco代理  MPbio代理  Laysan bio代理  NANOCS代理  Avanti代理  wako代理  lumiprobe代理（活性荧光染料）   NEB酶代理  Roche酶代理  Toyobo酶代理   USP代理  EP代理  Dr代理  TRC代理  TCI代理  Reagecon代理 Megazyme代理 Hampton代理（蛋白结晶） whatman代理（滤膜滤纸） GE代理（蛋白纯化） Corning康宁代理  Axygen代理 Falcon代理  NISSUI日水代理 Himedia代理 OXOID代理  BD培养基代理 Ludger代理（糖蛋白分析产品）  Eppendorf代理  Labnet代理  标准品代理 抗体代理 酶试剂代理  培养基代理 耗材代理 Elisa试剂盒代理 。

Hampton 银弹 Silver Bullets

Hampton蛋白悬滴结晶板 HDP Hanging Drop Crystallization Plate
美国Hampton Research公司位于加利福尼亚州，是一家专门从事蛋白质晶体研究的生产商。该公司向全球科研人员提供全面的晶体研究试剂和相关实验耗材，同时提供晶体设计和合成方面的定制服务。Hampton Research公司以其先进的生物大分子结晶技术和广泛实用的产品线，不仅为全世界晶体研究人员的工作带来了便捷，而且也受益于科研人员的回馈不断发展自己，目前已成为晶体研究领域最受信赖的品牌之一。
Hampton research主要产品：
Crystallization Screens 用于筛选和优化蛋白质/多肽/核酸结晶的一系列经验证的高精配方型溶液
Optimize Reagents 结晶级别盐类，聚合物，有机溶液或缓冲液
Crystallization Plates, Hardware & Accessories 结晶板（悬滴法和坐滴法，微量透析，微配液，自由界面扩散，凝胶以及无容器悬浮法）及其他配件
Cryocrystallography 低温晶体学耗材如 Crystalcap system,cryoloops
Goniometer Heads&Supplies 测角器头和配件
Protein Crystallization Standards 结晶级别标准蛋白
Custom Shop Crystallization Reagents 定制试剂盒和结晶溶液内的单一组分
StockOptions Kits 内含盐类，缓冲液和冷冻液的简便型试剂盒
Tools，Seeding&Resin 结晶用探针，结晶笔，seeding法结晶工具
Capillary Mounts & Supplies 毛细管,玻璃纤维, 蜡,黏合剂和密封剂
Hampton蛋白悬滴结晶板 HDP Hanging Drop Crystallization Plate

HDP Hanging Drop Plate

Single Well with Tool

Hanging Drop Wells
Applications—Hanging drop crystallization
Features
  Made from optically superior polymer (UVP)
  Allen key novel crystal plug closure system
  Wells are micro-numbered
Description  描述：
The Swissci Hanging Drop Crystallization Plate is a breakthrough for protein crystallization in a 96-well format. For the first time individual wells can be identified and removed without any disturbance to the growing crystals inside the plate.Description
The plate has been developed by Swissci AG together with leading Crystallographers. It is the result of many years of experience in successful robotic high-throughput crystallization.
The Hanging Drop Crystallization Plate offers unique properties that make it ideal for both nanoliter crystallization screening and microliter optimization alike. Made from optically superior polymer (UVP) and with a new design of the wells, the plate allows easy crystal viewing and retrieval. The system is fully covered by design and patent protection.
The Advantages of the Hanging Drop Crystallization Plate
Easy Crystal Retrieval
Raised wide wells make the crystal mounting especially easy. Allen key system allows for smooth removal and subsequent microscopic investigation / X-ray with the novel crystal plug closure all included in the system.
Easy Viewing
The wells are wide conical and have a lens effect for perfect illumination. The micro-numbering ensures you will never loose the location under the microscope.
The optically superior polymer is UV transmissible and can be used to differentiate between salt and protein crystals.
Integral Sealing
Wide partition walls between each well provides a high surface area for very good sealing with the advanced quality sealing tape. The sealing tape is integrated into the kit so there is no need to purchase additional parts prior to starting a procedure.
Wide Range of Volumes
Typical volumes are 50 – 200 µl of reservoir and 10 nanoliter – 5 microliter drop size.
SBS Standard
The complete plate is designed to the 96-well SBS standard for all common holders.

Hampton蛋白悬滴结晶板 HDP Hanging Drop Crystallization Plate 相关产品：

Wizard Tube 
The Wizard™ Classic line of random sparse matrix screens is designed to increase your probability of producing crystals during the coarse screening phase when crystallizing biological macromolecules (proteins, nucleic acids, peptides, and combinations thereof).
The Wizard Classic reagents are proven to be a highly effective starting point in the screening of biological macromolecules. The Wizard Classic formulations include a large range of crystallants, buffers, and salts covering a broad range of crystallization space at pH levels from pH 4.5 to pH 10.5.Choose from Wizard Classic 1, 2, 3, or 4 non-overlapping formulations in matrix blocks or tubes.

Wizard Cubic LCP
The tools in the Wizard Cubic LCP (lipidic cubic phase) Kit enable researchers to prepare LCP-type crystallizations by hand. Ideal for low-protein experiments: effective protein volume for a single crystallization experiment is about 80 nanoliters. Wizard Cubic LCP Kit tools work especially well when traditional methods have failed to yield crystals. Lipidic cubic phase has worked well for the crystallization of 7TM membrane proteins (proteins with seven transmembrane helices). Four out of six GPCRs (G-protein coupled receptors), an important membrane protein class, and several microbial 7TM proteins have been crystallized using the LCP approach.

CRYO (I、II)
The Wizard Cryo™ line of random sparse matrix screens is designed for scientists who want to avoid the additional step of optimizing a cryoprotectant condition. Every Wizard Cryo formulation flash-freezes to a clear, amorphous glass in liquid nitrogen or in a cryo-stream at 100K. Crystals can be frozen directly from their growth drops, avoiding the additional step of pre-equilibration with an artificial cryo-condition that can damage the crystal. Eleven different cryocrystallants and sparing use of glycerol ensures a broad sampling of possible cryo conditions. Choose from Wizard Cryo 1 or 2 formulations in tubes or Wizard Cryo 1 and 2 together in a 96-well matrix block.

Hampton Siliconized Glass Cover Slides

ApplicationsHanging, sitting or sandwich drop crystallization
FeaturesHigh purity of glassSiliconized, hydrophobic glass surface0.22 mm & 0.96 mm glass thicknessThicker glass slides preserve temperature longer12 mm, 18 mm, & 22 mm glass diameterCircle & squareUV Compatible (>85% transmission)
12 x 0.22 mm Circle
18 x 0.22 mm Circle
22 x 0.22 mm Circle & Square
Description
Siliconized glass cover slides allow a droplet to be suspended in a position which provides near optimal conditions for vapor diffusion with the surrounding reservoir solution. These siliconized glass cover slides provide a consistent, high quality finish for crystallization experiments. The hydrophobic surface produces a drop which “stands well” and does not flatten on the glass. The siliconized surface prevents the adhesion of crystals and precipitate onto the glass surface. Use Dow Corning Vacuum Grease (HR3-510), Dow Corning 7 Release Compound (HR3-508), or immersion oil to seal cover slide to plate. Available in 12, 18 or 22 mm diameter circles and 22 mm diameter squares. Available in 0.22 mm or 0.96 mm glass thickness. The 0.96 mm thick slides are virtually unbreakable during crystallization handling.
The following slides are UV transmissable (>85%):
HR3-277 and HR3-279 – 12 mm x 0.22 mm Siliconized circle cover slides
HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides
HR3-239 and HR3-241 – 18 mm x 0.22 mm Siliconized circle cover slides
HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

Plain Glass Cover Slides
ApplicationsHanging, sitting or sandwich drop crystallization
Features
0.22 mm glass thickness
12 mm glass diameter
Hydrophilic glass surface
Circle & squareDescription
Plain, non-siliconized, hydrophilic glass cover slides. Useful for hanging drop, sitting drop, and sandwich drop vapor diffusion crystallization methods. The hydrophilic surface creates a drop which is more flat than a drop on a siliconized surface. This offers enhanced imaging for very small drops. Use Dow Corning® Vacuum Grease (HR3-510), Dow Corning® 7 Release Compound (HR3-508), or immersion oil to seal cover slide to plate.
HR3-209T 12 mm Plain circle cover slides for Tecan robot 5 oz case (~2,400 slides)

HR3-209T 12 mm Plain circle cover slides for Tecan robot 5 oz case (~2,400 slides)

PEN-VAC Kit
ApplicationsHolding and manipulating small, flat surfaces such as glass cover slides
FeaturesSelf-contained vacuumNo power neededCompactDescription
PEN-VAC is a great tool for handling small, flat surfaced objects such as plain and siliconized cover slides, as well as plastic slides. Simply depress the side button, touch the tip to the object to be lifted and release the button. PEN-VAC creates a totally self-contained vacuum that lifts up to 50 grams for up to one minute. Less than an ounce, the lightweight aluminum body fits in a pocket. No power supply needed. The kit includes one PEN-VAC with 5 3/4″ blue body, (3) angled and (3) straight probes with (2) each 1/8”, 1/4”, 3/8” diameter blue silicone vacuum cups . It is packaged in a clear plastic storage case.

HR3-251  PEN-VAC Kit

Hampton晶体删选试剂
1．Screens 晶体删选试剂盒

2.Custom Shop Crystallization Reagents 结晶试剂盒中单独的试剂

3. Optimize™ Reagents晶体生长条件优化试剂

⑴ Optimize™ – Polymers聚合体
⑵ Optimize™- Organics (Volatile) 挥发性有机物
⑶ Optimize™- Organics (Non-Volatile)非挥发性的有机物
⑷ Optimize™- Salts 盐类
⑸ Optimize™- Buffers缓冲液
⑹ Optimize™- Solubilizing Agents (NDSB) 溶解试剂NDSB
⑺ Optimize™ – Reducing Agent还原剂-TCEP氢氯化物
⑻ Optimize™ – Cryoprotectants
⑼ Optimize™ – Oils用于结晶的油类
⑽ Optimize™ – Silica Hydrogel硅胶
⑾ Optimize™ – LM Agarose低熔点琼脂糖
5.Crystallization Plates, Hardware & Accessories结晶耗材
⑴ 24 Well Crystallization Plates 24孔晶体板-分悬滴和坐滴两种
⑵ 48 Well Crystallization Plates 48孔晶体板
⑶ 72 Well Crystallization Plates72孔晶体板
⑷ 96 Well Crystallization Plates 96孔晶体板等

Hampton蛋白结晶工具及仪器
CryoTong™ – Long
ApplicationsCrystal transfer under cryo temperature
FeaturesArtery clamp style closure30 seconds of cryo temperature180 mm length
Description
The CryoTong is a tool used to manually transfer a crystal mounted on a CrystalCap™ from liquid nitrogen to a magnetic base in a goniometer head positioned in a cryogenic stream, and then back to liquid nitrogen. The one-piece, compact CryoTong is available in two lengths. The long CryoTong is approximately 180 mm in overall length. The artery clamp style maintains the CryoTong in the closed position until the clamp is squeezed, which opens the opposing heads. The heads are non-magnetic stainless steel. The handle is magnetic stainless steel. The inside of the head is machined to closely surround the CrystalCap with loop and crystal in place. A small retaining lip is machined into the lower portion of the head to prevent the CrystalCap from slipping out of the CryoTong when the tool is in the closed position. The CryoTong can maintain the temperature of the crystal at -160°C for up to 30 seconds during room temperature crystal transfers. Choose the proper CryoTong size based upon the pin length required by the configuration of the x-ray data collection hardware used. The 18 mm CryoTong (HR5-112) is to be used with the CrystalCap HT and any other CrystalCap configured for 18 mm.HR5-114 Long CryoTong 18 mm, 180° features the head in alignment with the handle of the CryoTong.

Vial Clamp™ – Straight
ApplicationsVial support and manipulation
FeaturesStraight end tipHemostat style closureDescription
The Vial Clamp™ – Straight is a chrome plated, hemostat style tool. It has a tip shaped to hold the storage vial of all the CrystalCap Systems™ straight when the clamp is closed. The clamp can be locked using the hemostat style closure. This clamp makes it easy to dip the storage vial into liquid nitrogen for crystal storage. The complete length of the clamp is straight, with an overall length of 195 mm. When the vial is placed in the clamp, the length of it is positioned perpendicular, 90° to the length of the clamp.

CrystalWand™ Magnetic
ApplicationsCrystalCap Magnetic & CrystalCap Copper Magnetic handling toolDescription
The CrystalWand Magnetic is designed to be used exclusively with the CrystalCap Magnetic, CrystalCap Copper Magnetic, and CrystalCap HT systems during transfer of the caps from the vial to the goniometer head and from the goniometer to the vial. The 6 1/2” (165 mm) long chrome plated steel wand features a plastic housing enclosing a spring tensioned plunger that when depressed, moves a non-magnetic steel platform away from the magnet housed in the end of the wand. This causes the steel CrystalCap to detach from the wand and be placed readily into the vial or the CryoTong™. When the platform is retracted, the wand securely holds the steel CrystalCap Magnetic. The CrystalWand Magnetic 45° (McMiken Tool) offers the same functionality but is bent at a 45° angle at approximately 2.5 cm from the magnet end.HR4-729 CrystalWand Magnetic, StraightHR4-315 CrystalWand Magnetic, 45° (McMiken Tool)

Vial Clamp™ – Curved
ApplicationsVial support & manipulation
FeaturesCurved end tipHemostat style closureDescription
The Vial Clamp – Curved is a chrome plated, hemostat style tool. It has a tip shaped to hold the storage vial of all the CrystalCap Systems at an angle when the clamp is closed. The clamp can be locked using the hemostat style closure. The end of the clamp, where the vial is held, is curved at either a 45°/135° or 110°/ 70° angle. When the vial is placed in the clamp, the length of it is positioned to the clamp at either of those same angles. The overall length of each clamp is the same, 195 mm.HR4-671 Vial Clamp – Curved 45°/135°HR4-672 Vial Clamp – Curved 110°/70°

CrystalCap™ Holder
pplicationsCrystalCap support inside stainless steel dewars
FeaturesAdjustable heightSupports up to 8 CrystalCaps15 ml vial position for liquid propane500 and 1,000 ml versionsDescription
CrystalCap Holders are convenient stands for holding all CrystalCap™ systems in liquid nitrogen dewars during crystal cryogenic procedures. Available in two sizes. Both holders feature spring-clips to secure the CrystalCap Vials in the holder. Both stands have 3 inches of adjustable Z (height) which allows one to raise or lower the CrystalCaps to the appropriate height, depending upon the liquid nitrogen level in the dewar. Each holder is supplied with a socket driver for height adjustment.500 ml version holds five CrystalCaps, two 15 ml vials (for liquid propane procedures) and fits into the 500 ml dewar. 1,000 ml version holds eight CrystalCaps, two 15 ml vials (for liquid propane procedures) and fits into the 1,000 ml dewar.HR4-707 CrystalCap Holder – 500 ml
HR4-706  Replacement Height Adjustment Tool